All tanks are Visually Inspected (VIP’d) and for safety reasons would be shipped without air. These tanks are Nitrox-Ready to 40%
| HP100 | HP120 | HP117 | HP133 | |
| Service Pressure | 3442 psi | 3442 psi | 3442 psi | 3442 psi |
| Buoyancy *Full | – 8.41 lbs | – 8.82 lbs | – 9.12 lbs | – 9.08 lbs |
| Buoyancy *Empty | – 0.59 lbs | 0.65 lbs | 0.16 lbs | 1.45 lbs |
| Weight Empty | 34 lbs | 39.2 lbs | 37.6 lbs | 42.4 lbs |
| Outside Diameter | 7.25″ | 7.25″ | 8.00″ | 8.00″ |
| Length | 25.3″ | 29.1″ | 24.2″ | 26.85 |
| REE | 86 cc | 100 cc | 100 cc | 113 cc |
Valves:
XS Scuba PVD PRO Valve:
- Mil-Spec black PVD finish
- Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
- 3/4″ – 14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% oxygen
- 1.5 handwheel rotations from fully on to fully off
- Dip tube included
Thermo Pro Valve:
- Standard yoke outlet w/spin-out DIN insert converts to 230 bar DIN outlet
- 3/4″ – 14 NPSM standard inlet threads
- Clean for pre-blended Nitrox up to 40% FO2 oxygen
- O-ring sealed bonnet
- Easy grip rubber handwheel
- Threaded dip tube included
- Service pressures: 2400, 3000, 3442 psi
Thermo DIN Valve:
- Dedicated 300 bar DIN outlet
- Attachment of DIN first stages only
- 3/4″ – 14 NPSM standard inlet threads
- Standard inlet threads
- Threaded dip tube included
- Service pressures: 3000, 3500, 4350 psi
Thermo Modular PRO Valve:
- Standard yoke outlet w/spin-out adapter converts to 230 bar DIN outlet
- Modular access plug included
- 3/4″ – 14 NPSM standard inlet threads
- Threaded dip tube included
- Clean for pre-blended Nitrox up to 40% oxygen
- Service pressure: 2400, 3000, 3442 psi
XS Scuba Modular PRO Valve:
- Standard yoke outlet w/ spin-out adapter converts to 230 bar DIN outlet
- Modular plug included
- 3/4″ – 14 NPSM inlet
- Clean for pre-blended Nitrox up to 40% FO2
- Service Pressure: 2400, 3000 or 3442 psi
- Hex wrench tighten dip tube
- O-ring sealed bonnet
|
|||
